BIXOLON SRP-352plusA&C Uživatelský manuál

Control Commands Manual SRP-350/352plusA&C Thermal Printer Rev. 1.03 http://www.bixolon.com

Rev. 1.03 - 10 -SRP-350/352plusA&C ESC SP n [Name] [Format] [Range] [Default] [Description] Set right-side character spacing. ASCII ESC SP n

Rev. 1.03 - 11 -SRP-350/352plusA&C ESC % n [Name] [Format] [Range] [Default] [Description] Select/cancel user-defined character set. ASCII ESC

Rev. 1.03 - 12 -SRP-350/352plusA&C ESC - n [Name] [Format] [Range] [Default] [Description] Turn underline mode on/off. ASCII ESC - n Hex

Rev. 1.03 - 13 -SRP-350/352plusA&C ESC ? n [Name] [Format] [Range] [Description] Cancel user-defined characters. ASCII ESC ? n Hex 1B 3F

Rev. 1.03 - 14 -SRP-350/352plusA&C ESC G n [Name] [Format] [Range] [Default] [Description] Turn double-strike mode on/off. ASCII ESC G n H

Rev. 1.03 - 15 -SRP-350/352plusA&C ESC R n [Name] [Format] [Range] [Default] [Description] Select an international character set. ASCII ESC R

Rev. 1.03 - 16 -SRP-350/352plusA&C n Function 0, 48 Turn off 90°clockwise rotation mode. 1, 49 2, 50 Turn on 90°clockwise rotation mode. ESC W

Rev. 1.03 - 17 -SRP-350/352plusA&C ESC a n [Name] [Format] [Range] [Default] [Description] Select justification. ASCII ESC a n Hex 1B 61

Rev. 1.03 - 18 -SRP-350/352plusA&C Bit Off/On Hex Decimal Function Off 00 0 Paper roll end sensor disable. 0 On 01 1 Paper roll end sen

Rev. 1.03 - 19 -SRP-350/352plusA&C ESC t n [Name] [Format] [Range] [Default] [Description] Select character code table. ASCII ESC t n He

Rev. 1.03 - 2 - SRP-350/352plusA&C1. Control Commands List Command Name HT Horizontal tab LF Print and line feed FF Print and return to stand

Rev. 1.03 - 20 -SRP-350/352plusA&C ESC { n [Name] [Format] [Range] [Default] [Description] Turns upside-down printing mode on/off. ASCII ESC {

Rev. 1.03 - 21 -SRP-350/352plusA&C [Notes] ▪ Frequent write command executions by this command may damage to the NV memory. Therefore, it is rec

Rev. 1.03 - 22 -SRP-350/352plusA&C GS $ nL nH [Name] [Format] [Range] [Description] Set absolute vertical print position in page mode. ASCII GS

Rev. 1.03 - 23 -SRP-350/352plusA&C [Description] [Notes] ▪ Enable or disables the following real-time commands. a b Function 0, 48 DL

Rev. 1.03 - 24 -SRP-350/352plusA&C <Function 1> GS ( E pL pH fn d1 d2 (fn=1) [Format] [Range] [Description] ASCII GS ( E pL pH fn d

Rev. 1.03 - 25 -SRP-350/352plusA&C ▪ When a=2, the memory switch 2 is set as follows : Bit Setting value Function 48 Font selection : Font A

Rev. 1.03 - 26 -SRP-350/352plusA&C <Function 12> GS ( E pL pH fn a (fn=12) [Format] [Range] [Description] ASCII GS ( E pL pH fn a H

Rev. 1.03 - 27 -SRP-350/352plusA&C GS ( L pL pH m fn [parameter] GS 8 L p1 p2 p3 p4 m fn [parameter] [Name] [Format] [Description

Rev. 1.03 - 28 -SRP-350/352plusA&C <Function 48> GS ( L pL pH m fn (fn=0, 48) [Format] [Range] [Description] ASCII GS ( L pL pH fn m

Rev. 1.03 - 29 -SRP-350/352plusA&C <Function 64> GS ( L pL pH m fn d1 d2 (fn=64) [Format] [Range] [Description] ASCII GS ( L pL pH

Rev. 1.03 - 3 - SRP-350/352plusA&C Command Name ESC d Print and feed n lines ESC p General pulse ESC t Select character code table ESC { Tur

Rev. 1.03 - 30 -SRP-350/352plusA&C <Function 65> GS ( L pL pH m fn d1 d2 d3 (fn=65) [Format] [Range] [Description] ASCII GS ( L

Rev. 1.03 - 31 -SRP-350/352plusA&C [Description] [Notes] ▪ The total capacity of the UV user memory is selectable as any one of [

Rev. 1.03 - 32 -SRP-350/352plusA&C <Function 112> GS ( L pL pH m fn a bx by c xL xH yL yH d1...dk (fn=112) [Format] [Range]

Rev. 1.03 - 33 -SRP-350/352plusA&C GS ( M pL pH fn m [Name] [Description] Customize printer. ▪ Protects or recovers values or data set or defined

Rev. 1.03 - 34 -SRP-350/352plusA&C <Function 2> GS ( M pL pH fn m (fn=2, 50) [Format] [Range] [Description] ASCII GS ( M pL pH fn m

Rev. 1.03 - 35 -SRP-350/352plusA&C GS ( k pL pH cn fn [parameter] [Name] [Description] [Notes] Specify and print

Rev. 1.03 - 36 -SRP-350/352plusA&C For QR Code symbol (when cn=49) ▪ The symbol data specified by Function 180 d1...dk is stored in the printer

Rev. 1.03 - 37 -SRP-350/352plusA&C <Function 066> GS ( k pL pH cn fn n (fn=66) [Format] [Range] [Default] [Description] [Notes] A

Rev. 1.03 - 38 -SRP-350/352plusA&C <Function 069> GS ( k pL pH cn fn m n (fn=69) [Format] [Range] [Default] [Description] [Notes

Rev. 1.03 - 39 -SRP-350/352plusA&C <Function 080> GS ( k pL pH cn fn m d1...dk (fn=80) [Format] [Range] [Description] [Notes] ASC

Rev. 1.03 - 4 - SRP-350/352plusA&C2. Control Commands Details 2-1 Command Notation [Name] [Format] [Range] [Description] The name of the co

Rev. 1.03 - 40 -SRP-350/352plusA&C ▪ The following data are added automatically by the encode processing. - Start pattern and stop pattern.

Rev. 1.03 - 41 -SRP-350/352plusA&C [Notes] ▪ The size information for each data is as follows : Send data Hex Decimal Data

Rev. 1.03 - 42 -SRP-350/352plusA&C <Function 167> GS ( k pL pH cn fn n (fn=67) [Format] [Range] [Default] [Description] [Notes] ASC

Rev. 1.03 - 43 -SRP-350/352plusA&C [Notes] ▪ Data stored in the symbol save are by this function is processed by Functions 181 and 182. The data

Rev. 1.03 - 44 -SRP-350/352plusA&C - Error Correction code words (employs the Reed-Solomon Error Detection and Correction algorithm) - Pad co

Rev. 1.03 - 45 -SRP-350/352plusA&C [Notes] ▪ Description of the Other Information data sent : Hex Decimal Condition 30H 48 Printing is possi

Rev. 1.03 - 46 -SRP-350/352plusA&C GS B n [Name] [Format] [Range] [Default] [Description] Turns white/black reverse printing mode on / off. A

Rev. 1.03 - 47 -SRP-350/352plusA&C GS L nL nH [Name] [Format] [Range] [Default] [Description] Set left margin. ASCII GS L nL nH Hex 1D 4C nL

Rev. 1.03 - 48 -SRP-350/352plusA&C ① GS V m ② GS V m n [Name] [Format] [Range] [Description] Select cut mode and cut paper. ① ASCII GS V m

Rev. 1.03 - 49 -SRP-350/352plusA&C GS ^ r t m [Name] [Format] [Range] [Description] Execute macro. ASCII GS ^ r t m Hex 1D 5E r t m Decim

Rev. 1.03 - 5 - SRP-350/352plusA&C CR [Name] [Format] [Description] [Notes] Print and carriage return. ASCII CR Hex 0D Decimal 13

Rev. 1.03 - 50 -SRP-350/352plusA&C ▪ The status to be transmitted is the four bytes that follows. -

Rev. 1.03 - 51 -SRP-350/352plusA&C [Notes] [Reference] ▪ The paper roll end sensor is unstable when the cover is open. - Fourth

Rev. 1.03 - 52 -SRP-350/352plusA&C GS h n [Name] [Format] [Range] [Default] [Description] Selects bar code height. ASCII GS h n Hex 1D 68 n

Rev. 1.03 - 53 -SRP-350/352plusA&C GS r n [Name] [Format] [Range] [Description] Transmit status. ASCII GS r n Hex 1D 72 n Decimal 29 1

Rev. 1.03 - 54 -SRP-350/352plusA&C [Description] ▪ Prints a raster bit image in m mode. - m specifies the bit image mode. m Mode Vertical

Rev. 1.03 - 6 - SRP-350/352plusA&C n=1 : Printer status Bit Off/On Hex Decimal Function 0 Off 00 0 Fixed. 1 On 02 2 Fixed. Off 00 0 Draw

Rev. 1.03 - 7 - SRP-350/352plusA&C n=4 : Continuous paper sensor status Bit Off/On Hex Decimal Function 0 Off 00 0 Fixed. 1 On 02 2 Fixed.

Rev. 1.03 - 8 - SRP-350/352plusA&C DLE DC4 fn m t (fn=1) [Name] [Format] [Range] [Description] Generate pulse in real-time. ASCII DLE DC4 fn

Rev. 1.03 - 9 - SRP-350/352plusA&C [Notes] - Executes the printer power off. ▪ If this command is encountered, the printer will not continue to